Thermo King 098203, Руководство по обслуживанию

Страница: 153 / 264

Controller Maintenance
151
MP-4000 Test System Tool
The MP-4000 Test System Tool has the ability to test the following components:
• Controller Module (CM)
• Power Module (PM)
• Interconnect Cable
• Keypad
• Displays
IMPORTANT: As of February 1st, 2012, no failed Controller Module (CM) or Power Module (PM)
will be accepted under Warranty without a ‘Failed Component’ report accompanying the claim and the
part. The tester program generates this report. If no report is included on the claim it will be rejected. If
no report is included with the part the part will be returned (at the sending location cost).
Figure 126: Test System Tool
In the event of a MP-4000 Tester Tool part failure, please refer to the following information for
replacement.
All of the test plugs are covered under warranty for one (1) year from date of purchase by Emerson
Controls.
To order a replacement test plug, please provide the following information:
1. Part number of plug to be replaced
2. Original purchase date of test tool and serial number
3. Company name and shipping address
4. E-Mail or fax the information above to: (JCI will respond with payment terms, if applicable)
Wilmor Halamani
Email: Wilmor.Halamani@Emerson.com
Fax 45 70236044
Part Numbers:
Tool comes with all necessary test plugs required to perform
all tests noted above. Software will be located on the JCI
web site. www.myrefcon.com/support/mp-4000-tester/
The Tool is sold through Emerson Controls.
Ordering information (Contact)
Wilmor Halamani
Email: Wilmor.Halamani@Emerson.com
Phone 45 70234444
Fax 45 70236044.
1 MP-4000 Test System (item no. 8232- 010)
Delivery terms: ex works
Delivery mode: DHL
Delivery time: 2-3 days upon receipt of order
Payment terms: 14 days net
Please state purchase order number, invoice address and
delivery address when ordering.