Thermal Dynamics ULTRA-CUT 200 XT, Руководство по эксплуатации

Страница: 22 / 228

ULTRA-CUT 200 XT
2-2 SPECIFICATIONS Manual 0-5304
2.05 Precision Plasma Cutting Torch
The torch delivers the controlled current to the work through the main arc, causing the metal to be cut.
2.06 Specifications & Electrical Requirements
200 Amp System
Ultra-Cut 200 XT™ Specifications & Design Features
Max OCV (U0) 425 vdc
Minimum Output Current 5 Amps
Max Output Current 200 Amps
Output Voltage 60 - 180 vdc
Duty Cycle Rating 100% @ 200A, 200V, (40kW),
Ambient Temperature
for Duty Cycle Rating
104F° (40°C)
Operating range 14°F to 122°F (-10°C to + 50°C)
Power Factor 0.94 @ 200 A DC Output
Cooling Coolant and Forced Air (Class F)
Ultra-Cut 200 XT™ Power Supply
Input Power Input Current Suggested Sizes (See Note)
Voltage Freq. 3-Ph 3-Ph Fuse (Amps) Wire (AWG) Wire (mm 2 )
(Volts) (Hz) (kVA) (Amps) 3-Ph 3-Ph 3-Ph
480 50/60 42 52 100 #8 10
NOTE!
* Suggested wire size based on United States NFPA 70 National Electrical Code 2011 edition
published by the National Fire Prevention Association. Listings are from table 400.5(A)(2) for
flexible cord of certain types rated for 75 deg C in ambient temperatures up to 30 deg C. Using
wires of lower temperature rating or different insulation type may require larger wire size. De
rate for higher ambient.
These are suggestions only. Always refer to your local and national codes that apply to your
region for final determination of correct wire type and size.