Texas Instruments Titanium TI-89 Скачать руководство пользователя страница 925

Страница: 925 / 977

Appendix B: Technical Reference

922

1. If the

89 Titanium

is on, turn it off (press

) to avoid loss of

information stored in memory.

2. Slide the protective cover over the keyboard and place the device face

down.

3. Push down on the battery cover latch, and then pull up to remove the

cover.

4. Remove all four discharged AAA batteries.

5. Install four new AAA alkaline batteries, arranged according to the

polarity (+ and -) diagram inside the battery compartment.

6. Replace the battery cover by inserting the two prongs into the two slots

at the bottom of the battery compartment, and then push the cover until
the latch snaps closed.

To replace the lithium backup battery, remove the battery cover and
unscrew the tiny screw holding the BACK UP BATTERY cover in place.

Remove the old battery and install a new WR44SW or 303 battery, positive
(+) side up. Replace the cover and the screw.

Replacing the
Alkaline Batteries in
the TI-89 Titanium

Replacing the
Lithium Battery in
the TI-89 Titanium

Lithium battery cover

AAA alkaline
batteries

Содержание Titanium TI-89


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Titanium TI-89

Отзывы:

Texas Instruments Titanium TI-89, Руководство пользователя, Страница: 925 / 977

Результаты поиска

Содержание Titanium TI-89

Отзывы: