TESTO 0572 0158, Инструкция по эксплуатации

Страница: 74 / 178

5 First steps
74
10. Click on [New stationary zone] .
11. Open the selection list via button and select the zone to
which the probe should be assigned.
12. Click on [Next >] .
13. Click in the TE type field and enter the thermocouple element
type ( K , J , T or S ) if this information is necessary for the device.
14. If required, change the default values in fields Probe name and
Channel name .
Assign channel names that are not longer than
20 characters.
15. If required, import adjustment data for the individual probes:
Click on [Import adjustment data] .
16. Click on [Next
>
] .
- The settings for the measuring cycle are displayed.