TESTO 0572 0158, Инструкция по эксплуатации

Страница: 101 / 178

6 Using the product
101
Creating a new group
1. Right-click on component, then click on [Insert into new
group] .
- A new alarm group is created.
2. Overwrite the default names in Group alarm settings .
Move to…
1. Right-click on component, then click on [Move to …] .
- A selection of available alarm groups is displayed.
2. Click on required alarm group.
- The component is assigned to the selected alarm group.
Remove from group
1. Right-click on component, then click on [Remove from group] .
- The component is removed from the assigned alarm group.
Delete group
1. Right-click on component, then click on [Delete this group] .
- The assigned alarm group is deleted, all components that were
assigned to this group are now without an alarm group.
Apply to all
1. Right-click on component, then click on [Apply to all] .
- The alarm group assigned to this component is applied to all
other components.
6.4.3.2. Channels
Any configuration changes are only transferred to the
probe/base once you have exited the
Alarm management
menu!
You should therefore exit the
Alarm management menu
after editing.
1. Click on
Alarm management in the navigation area.
- The data area shows the sub-menus Base alarm settings ,
Component alarm settings, Channel alarm settings .
2. Click on Channel alarm settings .
- The probe alarm settings are shown in the display area.