TESTO 0572 0158, Инструкция по эксплуатации

Страница: 115 / 178

6 Using the product
115
> Use the checkboxes to determine whether the respective
minimum reading ( Min ), maximum reading ( Max ) and/or
average value ( Mean ) should be calculated for the individual
time spans.
At least one of these values must be activated to be
able to perform the compression of the table.
2. Enter the time span under Extract and determine its unit.
Possible settings for the unit:
•
sec (second)
• min (minute)
• h (hour)
• d (day).
3. Click on [OK] .
- The dialogue is closed and the table is shown compressed.
Pos: 146 /TD/Produkt verwenden/testo Saveris/05b Tabellen analysieren/05 Verdichtung aufheben @ 0\mod_1188996639140_79.docx @ 3605 @ 4 @ 1
6.5.2.5. Dropping compression
> Click on Edit | Tools | Drop compression .
- The table is shown again in its uncompressed form.
Pos: 147 /TD/Produkt verwenden/testo Saveris/05b Tabellen analysieren/07 größter Messwert @ 0\mod_1188996639859_79.docx @ 3625 @ 4444 @ 1
6.5.2.6. Determining largest reading
> In the Edit | Find | Maximum menu click on the curve for which
the largest reading should be determined.
- The largest reading is shown marked in the table.
Pos: 148 /TD/Produkt verwenden/testo Saveris/05b Tabellen analysieren/08 Kleinster Messwert @ 0\mod_1188996639562_79.docx @ 3615 @ 4 @ 1
6.5.2.7. Determining the smallest reading
> In the Edit | Find | Minimum menu click on the curve for which
the smallest reading should be determined.
- The smallest reading is shown marked in the table.
6.5.2.8. Add rows
> In the Edit | Tools | Add rows menu, activate the selection that
is to be displayed in extra rows.
- The extra rows are displayed in the table.