TESTO 0572 0158, Инструкция по эксплуатации

Страница: 116 / 178

6 Using the product
116
6.5.2.9. Compress
Tabular values are displayed in compressed format. The limits for
the compression range and the additional Min, Max and Mean
values are displayed.
> Click in the
Edit | Tools | Compress menu, a selection window
appears.
> Set the calculation and extract and confirm with OK .
- The table display is reduced to the selected Min, Max and Mean
values, and the entered time period.
6.5.2.10. Drop compression
The table compression is removed.
> Click in the
Edit | Tools | Drop compression menu.
- The table is displayed with all the individual values once again.
Pos: 149 /TD/Produkt verwenden/testo Saveris/06c Alarme analysieren/00 Alarme analysieren @ 0\mod_1189079097312_79.docx @ 3954 @ 2 @ 1
6.6. Analyzing alarms
If system or probe alarms were triggered by the Saveris base, you
can check the alarms and subsequently confirm (acknowledge)
them.
Pos: 150 /TD/Produkt verwenden/testo Saveris/06c Alarme analysieren/01 Alarme prüfen @ 0\mod_1189079390359_79.docx @ 3963 @ 3 @ 1
6.6.1. Checking alarms
> In the diagram or table view under Start | View mark the
Alarms option.
- The alarms received are shown in the Overview below the
diagram or the table.
>
Designation Explanation
Source
Probes on which the breach of the limit
value has occurred.
Time Date and time at which the message is
received.
Condition Condition that was fulfilled so that the
alarm was triggered; e.g.
Limit value
overrun .