TESTO 0572 0158, Инструкция по эксплуатации

Страница: 136 / 178

7 Maintaining the product
136
5. Click on [Add stationary zone] .
6. Open the selection list via button and select the zone to
which the probe should be assigned.
7. Click on [Next >] .
8. Click in the TE type field and enter the thermocouple element
type ( K , J , T or S ) if this information is necessary for the device.
9. If required, change the default values in fields Probe name and
Channel name .
10. If required, import adjustment data for the individual probes:
Click on [Import adjustment data] .
11. Click on [Next >] .
- The settings for the measuring cycle are displayed.
12. Enter Measuring cycle and define its Unit .
The measuring cycle determines the intervals at which
a new measured value is saved in the Saveris base.
Possible settings for the unit:
•
sec (second)
• min (minute)
• h (hour).
The smallest transfer rate for radio probes is one minute.