TESTO 0572 0158, Инструкция по эксплуатации

Страница: 143 / 178

7 Maintaining the product
143
Do not press any other keys on the Saveris base.
6. Confirm software message For backup, the base must be
restarted with [OK] .
7. Select the directory to which the backup file should be saved.
8. Click on [Save] .
- *bi2 file with backup data is saved.
The stored data can only be imported to a Saveris base
with the same firmware status. The memory capacity of the
target base must be larger than or equal to the source
base. For the memory size, see the
Select language
window.
To transfer the saved data to a Saveris base, please
contact Customer Service.
Pos: 173 /TD/Produkt instand halten/testo Saveris/Base neu starten @ 12\mod_1339775093729_79.docx @ 130896 @ 2 @ 1
Saveris
7.5. Restarting the Saveris base
Only carry out these steps if they will resolve the problem
indicated by the relevant alarm message, see
Saveris base
alarm messages, page 172 .
✓
The Saveris base display shows Info Base .
1. Press [ESC] twice in rapid succession.
- Shutdown appears on the display and the Saveris base
switches off.
2. Press [ESC] .
- The Saveris base is started.