4 Transmitter
19
3.
Tie together each of the two adjacent cores using a cable tie.
4.
Attach terminal strip for voltage supply and analog outputs.
Pos: 42 /TD/Erste Schritte/MUF 63xx/Relaisausgänge anschließen Panel @ 4\mod_1251814425917_79.docx @ 47891 @ 4555 @ 1
4.3.2.3.
Connecting the relay outputs
Only have the transmitter wired and connected by
authorized personnel with the voltage disconnected.
Relay terminal strip,
item (
2
) of overview of
terminals
There is the option of twelve terminals for a total of four relays.
1.
Remove relay cover.
2.
Disconnect relay terminal strip.
3.
Strip cable ends and clamp on wire end ferrules.
4.
Connect relays according to chosen function (NC/NO) (see
diagrams below; relay 1 is shown as an example of a
connection).
Connection note
• For the connection, a double-insulated mains cable
(sheathed cable) with a cross-section of at least 1.5
mm² must be used.
• Cable connection (
2
) may not be routed in a loop within
the relay trough (
1
).
• It is recommended that you always tie 2 adjacent cores
to one another using a cable tie (
3
).
Содержание 0555 6383
