TESTO 0555 6383 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 76

background image

5 Parameterizing, adjusting and analyzing software (P2A software)

44

Pos: 68 /TD/Überschriften/MUF/4.6 Wartung und Reinigung @ 3\mod_1234443039129_79.docx @ 24982 @ 2 @ 1

4.6.

Maintenance and cleaning

Pos: 69 /TD/Produkt instand halten/MUF 63xx/Gerät warten/reinigen 6384/6386 @ 4\mod_1252052576316_79.docx @ 48213 @ 335 @ 1

4.6.1.

Maintaining the instrument

We recommend that the adjustment and settings of the transmitter
be checked at regular intervals using the
• User menu (Operation, page 26) or
• P2A software (Parameterizing, adjusting and analyzing software

(P2A software), page 44)

Convenient "remote monitoring" of the transmitter can be
implemented, for example by using a relay as a collective alarm
(see

Editing Main Menu Alarm, page

31

) whose messages are

forwarded to a local alarm transmitter (horn, light) or PLC.

4.6.2.

Cleaning the instrument

Instrument surface

• Clean the surface of the instrument with mild cleaning agents

(e.g. washing-up liquid) and water. Only use gentle and
standard cleaners.

• Do not use any aggressive or chafing cleaning agents such as

thinner, liquid scouring agent, wax, benzine, concentrated acids
and lyes.

• Carefully rub down the instrument surface with a moist and soft

cloth.

Pos: 70 /TD/Überschriften/MUF/6 Parametrier-, Abgleich und Analysesoftware (P2A-Software) @ 3\mod_1234258523713_79.docx @ 23932 @ 1 @ 1

5

Parameterizing, adjusting and analyzing
software (P2A software)

Pos: 71 /TD/Überschriften/MUF/4.1/5.1/6.1 Leistungsbeschreibung @ 3\mod_1234258595211_79.docx @ 23951 @ 2 @ 1

5.1.

Specifications

Pos: 72 /TD/Leistungsbeschreibung/Verwendung/MUF63xx/MUF 63xx P2A @ 3\mod_1234258967326_79.docx @ 24065 @ 355 @ 1

The P2A software is used for the parameterizing, adjustment and
analysis of testo transmitters. The following applies:
• Generally, all newer testo transmitters (as of 2007) are

supported.

• For each newly purchased Testo transmitter, a free software

upgrade must be installed, containing the instrument drivers for
all transmitters which are connectable at that time.

• This upgrade can be downloaded free of charge at any time

from the Testo homepage

www.testo.com/download-center

(requires registration).

«
...
42
43
44
45
46
...
»

Содержание 0555 6383













































































Отзывы:

Нет отзывов

Похожие инструкции для 0555 6383

Бренд: B&G Страницы: 4

Бренд: B-band Страницы: 28

Бренд: Vega Страницы: 12

Бренд: Scosche Страницы: 4

Бренд: Valcom Страницы: 36

Бренд: JETStream Страницы: 62

Бренд: AAS Страницы: 4

CANopen BTL5-H1-M-H/W Series

Бренд: Balluff Страницы: 6

Бренд: JM Страницы: 21

Бренд: LotusRC Страницы: 2

Бренд: Sole Digital Страницы: 17

RC4Magic Series 3 DMXio

Бренд: RC4 Страницы: 20

Бренд: Itm Страницы: 50

PowerTalk Head w/ADSP & SNS 04-22

Бренд: SGC Страницы: 72

Бренд: Team Blacksheep Страницы: 14

Бренд: IBM Страницы: 411

FLOWLINE US01 Series

Бренд: Echotouch Страницы: 64

Бренд: Cameo Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды