TESTO 0555 6383, Инструкция по эксплуатации

Страница: 36 / 76

4 Transmitter
36
2. Continue to Main Menu Message with  or  or return to
Measuring Mode with ESC .
Pos: 57 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Meldungen bearbeiten @ 3\mod_1234526541417_79.docx @ 25398 @ 4 @ 1
4.4.5.5. Editing Message main menu
Messages can be confirmed/acknowledged, the last messages can
be called up and the display of the messages can be switched on
or off.
1 Operating hours at the
time of message
2 Message code (see
Status, warning and error
messages, page 39).
3 Message text
4 Message number
(example: "4/7" refers to
the fourth of seven
messages)
5 Number of messages
present (example: "4/7"
refers to the fourth of
seven messages)
Using the P2A software (see Parameterizing, adjusting and
analyzing software (P2A software), page 44) you can
predefine whether messages are to be shown in the
display.
1. In the Measuring Mode press SET , select Main Menu Message
with  or  and confirm selection with SET .
2. Confirm Confirm message using SET .
3. Select Last messages with  or  and confirm with SET .
4. Scroll between the warning and error messages recorded so far
using
 or  and return to Last messages using ESC .
5. Select Information with  or  and confirm with SET .
6. Scroll between the status messages recorded so far using  or
 and return to Information using ESC .
7. Continue to Display of message with  or  .
ON : Measurements are shown on the display in Measuring
Mode.
OFF : No messages shown on display.
8. Select ON or OFF with  or  and confirm selection with SET .