TESTO 0555 6383, Инструкция по эксплуатации

Страница: 30 / 76

4 Transmitter
30
Pos: 53 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Kanäle bearbeiten @ 3\mod_1234511119158_79.docx @ 25322 @ 34 @ 1
4.4.5. The individual main menus
4.4.5.1. Editing main menu of channel 1
An overview is given in Overview of the testo 6383 user menu,
page 28).
You can perform basic settings for channel 1.
1.
In the Measuring Mode press SET , select Main Menu
Channel 1 with

or

and confirm selection with SET .
One of the following parameters can now be selected using 
or

, after which the selection must be confirmed with SET :
• Channel 1 Unit
The parameter for this channel is selected.
Edit/select parameter with
 or  , confirm with SET or abort
entry with ESC .
• Scale minimum for channel 1:
The lower scale limit is edited; Unit as selected above.
Editing the value: Scroll one digit to the right using
 and
increase value of digit by 1 using

. Confirm with SET or abort
entry with ESC .
• Scale maximum for channel 1
The upper scale limit is edited;
Unit as selected above.
Editing the value: Scroll one digit to the right using
 and
increase value of digit by 1 using  . Confirm with SET or abort
entry with ESC .
• Signal delay ("Attenuation") for channel 1
The analog signal can be delayed ("Attenuation"); a time
constant is selected for this (1 = no delay; 2-15 = delay in
seconds)
Edit/select parameter with
 or  , confirm with SET or abort
entry with ESC .
2. Continue to the main menu with  or  or return to Measuring
Mode with ESC .