TESTO 0555 6383, Инструкция по эксплуатации

Страница: 45 / 76

5 Parameterizing, adjusting and analyzing software (P2A software)
45
The software must only be bought one time, even for owners of
several testo transmitters.
5.1.1. Functions and use
In the P2A software, two different file types are used: The
instrument and the parameter file.
Instrument file
The parameters of a particular transmitter are stored in its so-called
instrument file. Using this file, the parameters can be edited and the
instrument can be tested and adjusted.
Instrument files also contain the respective histories in addition to
the parameter data, i.e. "log books" are kept for the previous
parameterizations, adjustments and messages (see Transmitter
history page 65).
Instrument files are ".cfm" format files.
Parameter file
Parameter files are not tied to a specific individual transmitter and
contain only parameter data/no history data.
If you use various instruments of the same type, you can create
parameter files once (e.g. by saving the appropriate instrument file
as the parameter file) and transmit these onto the other
instruments.
Parameter files are ".cfp" format files.
Pos: 73 /TD/Leistungsbeschreibung/Systemvoraussetzungen/MUF 63xx @ 3\mod_1234260654399_79.docx @ 24084 @ 3555 @ 1
5.1.2. System requirements
Operating system
• Windows® 2000 SP4
• Windows® XP Home/Professional SP3
• Windows®
Vista
• Windows® 7
Computer
The computer must fulfil the requirements of the respective
operating system. The following requirements must additionally be
fulfilled:
• Interface USB 1.1 or higher
• Graphic resolution min. 1024 x 768