Terex Genie Z-45/25 Bi-Energy, Руководство по обслуживанию, Страница: 40 / 213

3 - 14 Z-45/25 Bi-Energy • Z-45/25J Bi-Energy Part No. 237062
September 2015 Section 3 • Scheduled Maintenance Procedures
B-1
Check the Radiator
Maintaining the radiator in good condition is
essential for good engine performance. Operating
a machine with a damaged or leaking radiator may
result in engine damage. Also, restricting air flow
through the radiator (i.e., dirt or debris) will affect
the performance of the cooling system. A frequent
check allows the inspector to identify changes in
the condition of the radiator that might indicate
cooling system problems.
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
1 Remove the engine pivot plate latch retainer.
2 Open the engine pivot plate latch and swing the
engine pivot plate out away from the machine to
access the radiator.
3 Inspect the radiator for leaks and physical
damage.
4 Clean the radiator fins of debris and foreign
materials.
5 Swing the engine back to its original position
and close the engine pivot plate latch.
6 Install the engine pivot plate latch retainer.
B-2
Check the Exhaust System
Maintaining the exhaust system is essential to
good engine performance and service life. Running
the engine with a damaged or leaking exhaust
system can cause component damage and unsafe
operating conditions.
Bodily injury hazard. Do not
inspect while the engine
is running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
1 Remove the engine pivot plate latch retainer.
2 Open the engine pivot plate latch and swing the
engine pivot plate out away from the machine to
access the exhaust system.
3 Be sure that all nuts and bolts are tight.
4 Inspect all welds for cracks.
5 Inspect for exhaust leaks; i.e., carbon buildup
around seams and joints.
Checklist B Procedures