![background image](http://html.mh-extra.com/html/terex/genie-z-45-25-bi-energy/genie-z-45-25-bi-energy_service-manual_1088715104.webp)
4 - 32
Z-45/25 Bi-Energy • Z-45/25J Bi-Energy
Part No. 237062
September 2015
Section 4 • Repair Procedures
10 Locate the 3 white wires that lead from the
voltage regulator to the negative rectifier
assembly.
a
white wires (#10 nuts)
b
negative rectifier assembly
c
black wire (#10 screw)
d
black wire (#4 nut)
e
voltage regulator
mounting fastener (#8 screw)
f
voltage regulator
g
red wire (#10 screw)
h
positive rectifier assembly
11 Remove the nuts on those 3 wires from the
negative rectifier assembly, then remove the
wires.
Note: Do not remove the spacers from the
underneath the wires on the negative rectifier
assembly.
12 Locate the red wire that leads from the voltage
regulator to the positive rectifier assembly.
13 Remove the screw that attaches the red wire to
the positive rectifier assembly.
14 Remove the #4 nut that attaches the black wire
to the voltage regulator.
15 Remove the voltage regulator mounting screws.
16 Remove the voltage regulator while carefully
guiding the red and black wires from
underneath the bottom support of the positive
and negative rectifier assembly.
17 Install the new voltage regulator by following the
previous steps in reverse order.
18 Apply Loctite® removable thread sealant onto
the voltage regulator mounting fasteners and
torque to specification. Refer to Section 2,
Specifications
.
19 Torque all other fasteners to specification. Refer
to Section 2,
Specifications
.
20 Install the plastic cover onto the generator then
install the generator onto the machine.
21 Adjust the generator belts. See 7-2,
How to
Adjust the Generator Belts.
22 Adjust the voltage regulator. See
How to Adjust
the Voltage Regulator.
Component damage hazard. The
voltage regulator and/or generator
may become damaged if the
voltage regulator is not properly
adjusted after replacement.
GENERATOR
b
g
h
c
f
d
e
a
Содержание Genie Z-45/25 Bi-Energy
