Terex Genie SX-105 XC, Руководство оператора, Страница: 49 / 76

First Edition • Third Printing
Operator's Manual
Operating Instructions
Part No. 1270327GT SX
™
-105 XC
™ • SX ™
-125 XC
™
47
To Extend and Retract Axles
1 Turn the key switch to platform control.
2 At the platform controls,
press down the foot switch
and move the drive control
handle in either direction
and move the axle switch
in the appropriate direction.
The axle extend and retract indicator lights will
flash while the axles are moving. The axle extend
indicator light will stay on when the axles are fully
extended. The axle retract indicator light will stay
on when the axles are fully retracted.
The axles can only be retracted if the boom is fully
lowered and retracted and the platform is between
the circle-end wheels.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
3 Start the engine.
To Position Platform
1 Push and hold the function
enable button.
2 Push the appropriate
function button according
to the markings on the
control panel.
Use the function speed select
buttons to select function
speed.
When the arrow above the turtle is lit, machines
functions will operate at slow speed. When the
arrow above the rabbit is lit, machines functions
will operate at fast speed.
Drive and steer functions are not available from
the ground controls.