![background image](http://html.mh-extra.com/html/terex/genie-sx-105-xc/genie-sx-105-xc_operators-manual_1088689014.webp)
Operator's Manual
First Edition • Third Printing
Work Area Safety
12
SX
™
-105 XC
™
• SX
™
-125 XC
™
Part No. 1270327GT
The weight of options and accessories such as
pipe cradles and welders will reduce the rated
platform capacity, and must be subtracted from the
platform capacity. See the decals with the options
and accessories.
If using accessories, read, understand and obey
the decals, instructions and manuals with the
accessory.
Do not raise or extend the
boom unless the machine
is on a firm, level surface.
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds in the platform only when the
machine is on a severe slope.
If the tilt alarm sounds when the platform is raised,
use extreme caution. Identify the condition of the
boom on the slope as shown below. Follow the
steps to lower the boom before moving to a firm,
level surface. Do not rotate the boom while
lowering.
The recovery mode should be used only by trained
and authorized personnel.
If the tilt alarm sounds with the
platform uphill:
1
Lower the boom.
2
Retract the boom.
If the tilt alarm sounds with the
platform downhill:
1
Retract the boom.
2
Lower the boom.
Do not raise the boom
when wind speeds may
exceed 12.5 m/s. If wind
speeds exceed 12.5 m/s
when the boom is raised,
lower the boom and do not
continue to operate the
machine.
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed
to the wind will decrease machine stability.
Содержание Genie SX-105 XC
Страница 11: ...First Edition Third Printing Operator s Manual General Safety Part No 1270327GT SX 105 XC SX 125 XC 9 ...
Страница 27: ...First Edition Third Printing Operator s Manual Controls Part No 1270327GT SX 105 XC SX 125 XC 25 ...
Страница 46: ...Operator s Manual First Edition Third Printing Inspections 44 SX 105 XC SX 125 XC Part No 1270327GT ...
Страница 76: ......