Terex Genie SX-105 XC, Руководство оператора

Страница: 36 / 76

Operator's Manual
First Edition • Third Printing
Inspections
34 SX
™
-105 XC
™ • SX ™
-125 XC
™
Part No. 1270327GT
11 Turn the key switch to platform control. At the
platform controls, move the drive control
handle in the forward direction and move the
extend axle toggle switch.
Result: The machine should drive and the
axles should extend. The axle extend and
retract indicator lights will flash while the axles
are moving and the axle extend light will stay
on when the axles are fully extended.
12 Return to the ground controls. Turn the key
switch to ground control.
13 Push and hold the function enable button and
push the boom up button and then the boom
down button.
Result: The boom should raise and lower
normally.
14 Push and hold the function enable button and
push the boom extend button and then the
boom retract button.
Result: The boom should extend and retract
normally.
15 Push and hold a function enable button and
push the turntable rotate left button and then
the turntable rotate right button.
Result: The turntable should rotate normally.
Test Machine Functions
16 Do not push and hold the function enable
button. Attempt to activate each boom and
platform function button.
Result: No boom and platform functions
should operate.
17 Push and hold the function enable button and
activate each boom and platform function
button.
Result: All boom and platform functions should
operate through a full cycle. The descent
alarm should sound while the boom is
lowering.
Test Auxiliary Controls
18 Push in the red Emergency Stop button to the
off position to shut off the engine.
19 Pull out the red Emergency Stop button to the
on position.
20 Simultaneously push and hold the
auxiliary power button and push
each boom function button.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom functions should operate.
21 Start the engine.