Terex Genie SX-105 XC, Руководство оператора, Страница: 35 / 76

First Edition • Third Printing
Operator's Manual
Inspections
Part No. 1270327GT SX
™
-105 XC
™ • SX ™
-125 XC
™
33
At the Ground Controls
1 Select a test area that is firm, level and free of
hazards.
2 Turn the key switch to ground control.
3 Pull out the red Emergency Stop button to the
on position.
Result: The beacons (if equipped) should
flash.
4 Start the engine. See Operating Instructions
section.
Test Emergency Stop
5 Push in the red Emergency Stop button to the
off position.
Result: The engine should shut off and no
functions should operate.
6 Pull out the red Emergency Stop button to the
on position and restart the engine.
Test the Extendable Axles
Note: Start this test with the axles retracted.
7 At the ground controls, push and hold the
function enable button and press the boom up
button.
Result: The boom should raise approximately
10° and then stop. On the LCD screen, the
arrow next to the extend axle symbol will flash.
The boom should not raise unless the axles
are extended.
8 Push and hold the function enable button and
press the boom extend button.
Result: The boom should extend 30 cm then
stop. On the LCD screen, the arrow next to the
extend axle symbol will flash. The boom
should not extend unless the axles are
extended.
9 Push and hold the function enable button and
push the turntable rotate left button.
Result: The turntable should rotate 40° and
then stop. The turntable should not rotate
more than 40° unless the axles are extended.
10 Push and hold the function enable button and
push the turntable rotate right button.
Result: The turntable should return to center,
rotate 40° to the right and then stop. The
turntable should not rotate more than 40°
unless the axles are extended.