EN
43
E
N
37878
05-2017
4
.
M
ai
n
te
n
an
ce
a
n
d
c
le
an
in
g
4.6
Trouble shooting
Alarm message 33 to 41
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
33: IDENT STOP
TRADE: xxx
A stop signal is given from a weighing or identifica-
tion system to stop the bin lift.
The xxx nr. explains the following error.
If an external so no Terberg VDH or Data manager
TMID7009 is mounted: Only message
IDENT
STOP TRADE
is displayed.
VDH or Data manager TMID7009:
- 33: LIST STOP L/H: block bin lift tag is listed
for stop.
- 33: NO TAG L/H: block bin lift no tag found by
identification system.
- TRD READER TIME OUT: block bin lift no
ready received on check id stop height.
Find out why the identification system is stopping
the bin lift.
34:
Not used.
35: BIN TOO HEAVY
L/H
An optionally or externally mounted weighing
system sends out a command to stop the bin lift
because the bin is too heavy. This stop signal can be
given over conventional identification signals or
over Clean Open CAN connection.
Electric / pressure weighing systems do not use this
alarm nr!! (They use alarm nr. 115).
The bin is too heavy, remove the bin.
Check the weighing system.
36: BIN TOO HEAVY
R/H
An optionally or externally mounted weighing
system sends out a command to stop the bin lift
because the bin is too heavy. This stop signal can be
given over conventional identification signals or
over Clean Open CAN connection.
Electric / pressure weighing systems do not use this
alarm nr!! (They use alarm nr. 116).
37: TRADE CONTAINER
TOO HEAVY
An optionally mounted weighing system sends out
a command to stop the bin lift because the contai-
ner is too heavy. This stop signal can be given over
conventional identification signals or over Clean
Open CAN connection.
Electric / pressure weighing systems do not use this
alarm nr!! (They use alarm nr. 117).
The container is too heavy, remove the container.
Check the weighing system.
38: TRUCK / BODY
MAXIMUM WEIGHT
An external (under body) weighing system or the
bin lifts controller calculated the max. allowed total
body weight has been reached.
The truck is at its maximum allowed vehicle
weight. Please empty the truck.
39: STOP IN
WEIGHING L/H
Weighing systems
TMDW9009 / TMDW8010 / VDH9013.
This signal is for bin lifts with weighing systems only:
The bin lifts controller detected the L/H lifting chair
has been stopped inside the weighing window.
Therefore the weighing results will be unreliable.
Put the bin down on the ground and retry, do not
stop the up- or down motion of the bin inside the
weighing window.
40: STOP IN
WEIGHING R/H
Weighing systems
TMDW9009 / TMDW8010 / VDH9013.
This signal is for bin lifts with weighing systems only:
The bin lifts controller detected the R/H lifting chair
has been stopped inside the weighing window.
Therefore the weighing results will be unreliable.
41: TRUCK TOO
SLANT
This signal is for bin lifts with weighing systems only:
The inclination sensor from the weighing system
has detected that the vehicle is positioned on a
slope which is too large to produce a reliable
weighing result.
Please reposition the vehicle on a more level
surface.
If this message occurs even when the vehicle is at
a flat surface, please check the inclination sensor
or weighing system.
