EN
15
E
N
37878
05-2017
3
.
B
in
l
if
t
o
p
e
ra
ti
o
n
3.4
Manual loading with the pick-up comb
(continued)
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
3.4.2 4-wheel containers;
with ROLL top;
capacity 770-1100 litres
with FLAT lid;
capacity 500 to 1280 litres
1) Switch on the refuse collection vehicle's
compactor body.
2) Select 4-wheel containers:
Set the rotary switch (E) to
4-wheel containers.
[Or press the black button (K), this
can be done on both button
control stations.
The right-hand LED next to the
4-wheel container should light up.]
*
Both the lifting chairs will go to
the correct height for loading
4-wheel containers.
3) Roll the container against and over the pick-up
combs (06).
4) Empty the bin:
Press the light blue UP but-
ton (G), on one of the two
button control stations.
The container will be lifted to
the tipping position and emp-
tied.
Because in manual operation the container
security switch is deactivated, great care must
be taken that the container is located correctly
on the pick-up combs.
If any refuse remains stuck in the container, you can
give it an extra shake by keeping the UP button
pressed.
5) Remove the bin:
-
Press the dark blue
DOWN button (H).
The container lowers to the
ground.
-
Pull the container out of
the bin lift as soon as the
wheels touch the ground.
[ ] *
This text applies to the optional button control stations. See 'Important components' at the start of this chapter.
The bin lift may be optionally fitted with automatic 4-wheel container recognition, so that when a 4-wheel
container is driven up against the lifting chairs, the bin lift will automatically switch to 4-wheel containers.
This is an ideal option if a combination of many 2-wheel bins and 4-wheel containers needs to be collected.
Only give an extra shake if there is a need for
this. Shaking takes time and causes extra
noise for the surrounding area.
When the 4-wheel mode is selected, the bin
lift will start to move!
For manual loading, the safety arms (04) do
not need to be folded down.
The optional DIN pick-up arms (18) must be
folded in.
