18
EN
E
N
3
.
B
in
l
if
t
o
p
e
ra
ti
o
n
37878
05-2017
3.7
Loading with the pick-up comb using SMT: Single Man Trade
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
1) Switch on the refuse collection vehicle's
compactor body.
2) Select 4-wheel containers:
Set the rotary switch (E) to
4-wheel containers.
[Or press the black button (K), this
can be done on both button
control stations.
The right-hand LED next to the
4-wheel container should light up.]
*
[Or wheel a 4-wheel container
over the pick-up combs the bin lift
will automatically switch to
4-wheel.] *
Both the lifting chairs will go to the correct height for
loading 4-wheel containers.
3) Switch on the automatic function:
Press the light green auto-
matic button (C).
The green check light should
light up.
4) Roll the container against and over the pick-up
combs (06).
-
The container is automatically lifted about 10 cm.
-
The bin lift will now wait until an UP/DOWN
button is activated in the left or right button
control station.
Single man trade is only possible when
4-wheel containers are lifted with the pick-up
comb.
Emptying 4-wheel containers via DIN-arms is
not possible with the single man trade
function, because the container security
switches do not operate then.
5) Empty the container:
Press the light blue UP but-
ton (G), on one of the two
button control stations.
The container will be lifted to
the tipping position and emp-
tied.
6) Remove the container:
-
Press the dark blue
DOWN button (H).
The container lowers to the
ground.
-
Pull the container out of
the bin lift as soon as the
wheels touch the ground.
When after lifting with single man trade, you
lift 2-wheel bins, the single man trade function
is remembered.
As soon as you offer a 4-wheel container again
single man trade is immediately reactivated!
[ ] *
This text applies to the optional button control stations. See 'Important components' at the start of this chapter.
For this function, the safety arms (04) do not
need to be folded down.
Single man trade is a (semi) automatic function that enables one person to empty 4-wheel containers.
If the function is activated, a 4-wheel container will be automatically lifted about 10 cm as soon as it is
wheeled against and over the lifting chairs.
When the 4-wheel mode is selected, the bin
lift will start to move!
The optional DIN pick-up arms (18) must be
folded in.
