OPERATION
Boss 2000E (08–03)
7
MACHINE CONTROLS AND INSTRUMENTS DESCRIPTIONS
1.
Recovery Tank – Stores extracted water. Tank will
hinge open to access internal components.
2.
Recovery Tank Dome – Recovery tank intake.
Dome is also used to connect floor tool vacuum
hose.
3.
Clean Water Tank – Stores 28 gallons of clean
water for cleaning.
4.
Water Fill Port – Port used to fill clean water tank.
5.
Prespray Wand – Tool used to prespray carpet
before operating machine in Deep Clean mode.
6.
Prespray Wand Solution Hose – Used with
prespray wand. Two 25’ hoses supplied.
7.
Prespray Wand Holder – Holds spray wand in
place when not in use.
8.
Clean Water Filter – Filters clean water to prevent
possible solution system clogs.
9.
Spray Bars – Detachable for easy maintenance.
10. Roller Bumper – Protects walls while cleaning.
11. Spotting Trowel – Tool used to blot out spots.
(Optional)
12. Spotting Trowel Storing Straps – Holds spotting
trowel in place when not in use.
13. Power Cord Pigtail – Extension cord connection.
14. Solution Tank Gallon Marker Tube – Shows
amount of gallons in clean water tank. Also used
to drain clean water tank.
15. Vacuum Pickup Head – Floor recovery intake.
16. Brush Housing – Houses rotating brush.
17. Brush Height Adjustment Knob – Adjusts
amount of brush pressure to floor.
18. Floor Tool Coupler – Solution hose connector for
floor tool.
19. Brush Pressure Meter – Indicates amount of
brush pressure.
20. Clean/Rinse Mode Switch – ”CLEAN” mode
directs solution to deep and light clean spray bars.
”RINSE” mode directs clean water to rinse out
light clean spray bar. This switch works in
conjunction with the Deep & Light Clean switches.
21. Pump Switch – Turns on pump. Twist grips must
be turned to activate spray.
22. Vacuum Switch – Turns on vacuum motor.
23. Deep/Light Clean Mode – Deep clean mode
directs water to deep clean spray bar. Light clean
mode directs water and injects cleaning solution to
light clean spray bar.
24. Reverse Release Lever – Allows machine to be
pulled backwards when lever is disengaged.
25. Prespray Mode – Directs solution to spray wand
for prespraying carpet.
26. Brush Lift Lever – Lifts vacuum/brush assembly
for transporting. Lowers vacuum/brush assembly
for cleaning.
27. Twist Grips – Starts and stops drive and solution
spray.
28. On–Off Key switch – Controls power to machine.
29. Hour Meter – Indicates amount of hours of
operation on machine.
30. Circuit Breakers – Breakers are resetable
electrical circuit protection devices.
31. Drain Hose – Drains recovery tank.
32. Spray Wand Coupler – Solution hose connector
for spray wand.
33. Foam Control Button – Feeds foam control
solution to recovery tank when foam begins to
buildup in recovery tank.
34. Bottle Support Rack – Holds cleaning solution
bottles in place when cleaning.
35. Prespray Bottle – Cleaning Solution used for
Deep Clean mode. (Sold separately)
36. Cleaning Solution Bottle – Used to hold Light
Clean mode Solution.
37. Foam Control Bottle – Used to hold ”Foam
Control” solution.
38. Control Grip Height Adjustment levers –
Enables you to lower and raise control grips for a
comfortable operating height.
Not Shown:
Power Cord – 75” detachable power cord.
Belt Clip – Clips extension cord to belt when
operating machine.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
