OPERATION
10
Boss 2000E (08–03)
6.
Fill clean water tank: Open filler door at front of
extractor and fill with 28 gallons, (106 liters) of hot
water (140«F, 60«C maximum) (Figure 7).
FIG. 7
ATTENTION: If using a bucket to fill and empty
machine, be certain to use a separate bucket to
empty machine. Dirty water in solution tank will
clog solution pump system.
WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
NOTE: If desired, add 2–4 oz./gal of FiberFresh Quick
Dry to reduce drying time.
7.
Raise or lower control grip for a comfortable
operating height. Squeeze two levers together
under console to raise or lower (three settings)
(Figure 8).
FIG. 8
8.
Transport machine to work assignment.
9.
Plug 75’ detachable power cord into pigtail cord on
machine.
10. Plug detachable power cord into a grounded wall
outlet (Figure 9).
FOR SAFETY: Do not operate machine unless cord
is properly grounded.
FOR SAFETY: Do not operate machine with the
use of additional extension cords. Only use
manufacturer’s extension cord equipped with
machine which has the proper capacity and is
grounded.
Grounded
3 Hole Outlet
Ground Pin
FIG. 9
WARNING: Do Not Operate With Damaged
Power Cord. Do Not Modify Plug. Unplug Power
Cord Before Servicing Machine.
If the supply cord is damaged or broken, it must be
replaced by the manufacturer or it’s service agent
or a similarly qualified person in order to avoid a
hazard.
11. Attach belt clip to belt and connect power cord as
shown (Figure 10).
FIG. 10
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
