Teltonika FMB630, Руководство пользователя

Страница: 48 / 173

48

Exit Event – Event generation on Geofence exit.

On Both - Event generation on Geofence entrance or exit.

No Event
Auto Geofencing does not require entering coordinates, instead it requires GPS visibility. If
vehicle stopped and activation timeout is reached, Auto Geofence will be created around the
vehicles last position by set Radius value. Auto Geofence event generation works the same as
Geofencing mentioned above.
6.3.6.6 Towing Detection
FMB630 activates towing function when below conditions are met:

Ignition (configured Ignition Source) is OFF.

Activation Timeout (set in Towing detection features) is reached.
When Activation Timeout is reached and Ignition is OFF, FMB630 monitors accelerometer
data. If Acceleration or Angle value reaches configured threshold for configured time (in ms),
device again checks Ignition state. If Ignition is still OFF according to configured "Ignition check
after Event" time, then event is generated and can send sms or make call if configured. Function
will be reactivated after FMB630 again detects change of Ignition state from ON to OFF.
Figure 41 Towing Detection Configuraton

Activation timeout – Activation timeout is time after which FMB630 turns ON towing
detection function if other condition mets (Ignition OFF state detected). It is measured in
minutes.

Make Call to – if function enabled makes call to specified phone number (configured in
predefined numbers)

Acceleration and Angle – values used to detect towing when ignition is OFF.

Duration – defines time period to check Acceleration and Angle values.