Teltonika FMB630, Руководство пользователя

Страница: 47 / 173

47

Shape – can be rectangular or circle

Priority – priority of Geofence event: low, high or panic, SW21, SW22, SW23, SW24.
These levels define priority of event information sending to server. See I/O element
description for more details about priorities.

Generate event (On entrance, On exit, On both) – choose when record will be
generated (or no event);

X1 – geofence zone left bottom corner X coordinate;

Y1 – geofence zone left bottom corner Y coordinate;

X2 or R – geofence zone upper right corner X coordinate (radius of circle when
Circular zone used);

Y2 – geofence zone upper right corner Y coordinate;
6.3.6.5 AutoGeofencing
AutoGeofence – the last known position after movement = off. If your car is being taken
away – you can be notified. The shape and size of the geofence zones are configurable. There is a
possibility to state whether entering in or out of the geofence triggers an asynchronous message.
Figure 40 FMB630 Features->Geofencing Configuration (2)
Auto Geofencing option can be configured by following parameters (Figure 40):

Activation TMO – Time period before Geofence is activated after vehicle stops.

Deactivate By:

Ignition – if ignition becomes high it will drop AutoGeofenze Zone

iButton – if iButton is attached it will drop AutoGeofence Zone

Edit iButton List – if list is not empty, attached iButton is tested against iButton list, if
match is found AutoGeofence zone is dropped.

Priority – Priority of generated event, which will be applied to saved record.

Generate Event:

Enter Event – Event generation on Geofence entrance.