Teltonika FMB630, Руководство пользователя

Страница: 49 / 173

49
6.3.6.7 IButton List
IButton list is used to enter authorized iButton ID codes, which are used to authenticate
driver in Immobilizer scenario or Auto Geofencing options.
Figure 42 Features->iButton Configuration
IButton value must be entered as it is written on it. User can save 500 iButtons to .csv file
and read them from same file using Read from File and save to file buttons. User can also enter
ibutton key ID in Ibutton ID list by attaching ibutton key to reader then connecting reader to
device after that click ‘copy ID’ and paste ibutton key in ibutton ID list.
6.3.7 CAN
CAN - Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus
standard designed to allow microcontrollers and devices to communicate with each other and
without a host computer.
6.3.7.1 CAN Bus settings
CAN 1 Enable parameter (ID=146)
Parameter enables or disables CAN 1 interface. Possible values: 0 – disable, 1 – enabled as
FMS line, 2 – enabled as FMS line and Tacho line.
Table 11 CAN 1 Enable parameter
Minimum
value
Maximum
value
Recommended
value
Value type
0 2 1 U8