Teltonika FMB630, Руководство пользователя

Страница: 10 / 173

10

4 digital inputs;

3 analog inputs;

4 open collector digital outputs;

4 1Wire® temperature sensor;

1Wire® iButton;

LEDs indicating device status;

K-Line interface for online Tachograph Vehicle Data transfer;

2xRS232 port;

RS485 port;

J1708 interface;

LVCAN interface;

CAN messages 2.0 A, B Active support. Speed up to 1 Mbit/s;

Roaming enabling/disabling;

Offline working mode;

Records importing using USB/microSD card;

Remote logs reading via SMS/GPRS;
Overvoltage protection:
Table 1 Overvoltage Protecton:
Description Voltage Duration
Normal operation 10-30V Unlimited
Protection turns on, device turns off. 34V Unlimited
Maximum voltage <70V Unlimited
Maximum voltage impulse 90V 5 miliseconds
2.3 Mechanical features
Table 2 FMB630 physical interfaces and operation environment
Part name Physical specification Operation environment
Navigation LED LED
Power supply 10...30 V DC
2 W Max
Operation temperature:
-25⁰C … +55⁰C
Storage temperature:
-40⁰C … +70⁰C
Energy consumption
1
:
GPRS: 120 mA r.m.s Max.,
Nominal: average 65 mA r.m.s,
GPS Sleep: average 28 mA,
Deep Sleep: average less than 7 mA
2
Storage relative humidity 5 … 95 % (non
condensating)
Modem LED LED
GPS
GPS antenna connector SMA
jack(female outer shell, female inner
pin)
GSM
GSM antenna connector RP-SMA
jack(female outer shell, male inner
pin)
Socket 2x10
Tyco Micro MATE-N-LOK™
or similar
1
Energy consumption has been tested at 12V voltage with no battery charging.
2
When in Deep Sleep mode no data storing and sending is activated.