Teltonika FMB630, Руководство пользователя

Страница: 94 / 173

94
* From Hercules (server) Send "#DO DAT=you text here" (in special packet)
Notes:
#DO DAT= command prints only to COM2
Link between FM and server has to be established for this functionality to work
On Valid data Receive Status LED will blink.
13.8.5 RFID HID Mode Configuration
1. External Devices ->COM2 Settings->Baudrate = 57600
2. External Devices ->COM2 Settings->Mode = RFID
13.8.6 RFID MF7 Mode Configuration
1. External Devices ->COM2 Settings->Baudrate = 9600
2. External Devices ->COM2 Settings->Mode = RFID MF7
13.8.7 Garmin Mode Configuration
13.8.7.1 Settings
1. External Devices ->COM2 Settings->Baudrate = 9600
2. External Devices ->COM2 Settings->Mode = Garmin
Ping Filter Enable Parameter:
0 - [DISABLED] = Ping packet will not blocked.
1 - [ENABLED] = Ping packet will be blocked.
Unicode Support Packet Enable Parameter:
0 - [DISABLED] = Unicode Packet will be send to server.
1 - [ENABLED] = Unicode Support Packet will not be send to server.
13.8.7.2 Firmware Configuration
Supported Garmin protocols: A ***
(http://developer.garmin.com/lbs/fleet-management/fmi-protocol-support-matrix/)
Blocked Garmin ID’s:

Command 0A

Date/Time Data 0E

Unit ID/ESN 26

Pvt Data 33

Legacy Stop Message 87

Legacy Text Message 88

Ping 0260

Ping response 0261

Product ID Request 0001

Product ID Data 0002
FM send ACK to these packets, ant these packets are not sent to server to reduce traffic.