Teltonika FMB630, Руководство пользователя

Страница: 95 / 173

95
Allowed Garmin ID’s:

ACK 06

NAK 15

Fleet Management Packet A1
Note: If packet are not listed here packet ID will be ignored.
13.8.8 TCP Link Mode
In this mode link with external device using text messages can be established.
Any string of data coming to COM will be routed to server. (if link is currently active) First
message will be packet to special packet
8
. Packet will be sent as Codec12.
If you want to send message to COM, you need to pack in special packet.
1. External Devices ->COMx Settings->Baudrate = any of available baudrates
2. External Devices ->COMx Settings->Mode = TCP Link Mode
3. When sending a packet through COMx doesn’t forget to enter a new line otherwise
the packet will not be recognized. Packet format: <enter your message> <enter
new line> - send. For example:
message/n or in HEX it should look like: 6D 65 73
73 61 67 65 0D 0A
When you send command to port X you assign Port A or port B as a recipient in your message
unique ID.
Message comes to device with port number added by +1 for example if message is for port 9
device will understand as 10.
Ignores timesync, and records because these parameters are automaticaly configured
when TCP Link mode is selected.
13.8.9 TCP Link Mode (Binary)
This mode is the same as above but binary message doesn’t need new line. Packet will be
sent as Codec12. Packet format: <enter your message> - send. For example:
message or in
HEX it should look like: 6D 65 73 73 61 67 65
1. External Devices ->COMx Settings->Baudrate = any of the available baudrates
2. External Devices ->COMx Settings->Mode = TCP Link Mode(Binary)
FMB630 supports buffering messages when there is no data link, messages will be saved to
flash with a timestamp. Space reserved for buffering is 64 kB. By default buffering is disabled. To
enable set “TimeStamp” property. Buffered messages will be sent using Codec13 protocol.
8
For additional information of special packet, please contact to your local sales representative