A) Wallet Reminder Unit x 1 B) Battery (CR2016) x 1
C) User Manual x 1
If any components are missing from the package, please return the
product to your dealer immediately.
Product Description
3
Wallet Reminder User Manual
Wallet Reminder is an effective Bluetooth Low Energy (BLE) loss preven-
tion solution for your wallet, purse, passport or other valuable posses-
sions. It is effectively an “electronic leash” that causes the tag and your
connected iOS device to emit an audible alarm and places a GPS marker
on a map whenever the devices become separated. The Wallet Reminder
also assists you in locating your linked iOS devices using the
”Find Me”
function
.
This product is compatible with iPhone (version 4S/5/5C/5S operating
iOS6 and above) / iPad (versions 3/4 operating iOS6 and above) / iPad
mini (all versions operating iOS6 and above) iPad Air and iPod Touch
(version 4 operating iOS6 and above.)
Quick Setup Guide
Step 1 -
Download the free
”HiProx Multi”
application from the
App
Store (iTunes).
Step 2 -
Enable Bluetooth on your iPhone/iPad as follows:
Go to
Settings / Bluetooth and switch the Bluetooth capability
”On”
.
Step 3 -
Place battery into Wallet Reminder as illustrated in Figure 1
below.
IMPORTANT NOTE: BE SURE TO INSERT THE BATTERY
BETWEEN THE UPPER AND LOWER CONTACTS.
Placing the battery on top of the contact and closing the lid may
cause damage to the battery terminal and invalidate your
warranty.
Specification
Product Diagram
2
4
5
Quick setup guide
Page 1
Package Includes Components
3
Communication Standard
Bluetooth® 4.0
Low Energy Wireless Technology
Compatibility
Search Range
164ft/50m(*Distance will vary depending on terrain and other factors.)
Alert Range
Up to 50ft (15 meters) adjustable
Battery Type
CR2016x1 included
Battery Life
6-12 months
Working Temperature
Temperature: 5
℃
~40
℃
, humidity : 20%~80%
Dimension/Weight
61.5x36x11.6mm (2.42x1.42x0.46inch) / 9.5g
Step 6 -
The settings for each connected device can be managed by
selecting the device and pressing the corresponding setting button
(Figure 4). The individual settings are shown on the
“Device Setting
Menu”
(Figure 5).
a. The Device Name text box displays the pre-determined device name.
You can change this to assign names to your tags, helping you indicate
what they are connected to (e.g. Wallet, Keys, etc). Click “Done” when
you’ve entered your preferred name.(Figure 5) Item 6.
b.
LinkLossAlert:
When enabled is an alarm condition with a preset
audible tone which will alert you to any “alarm condition” which is not
RangeAlarm
related. (Figure 5) Item 8.
c.
RangeAlarm:
Is an alarm condition which indicates an out of range
item and is recognizable by the audio tone which is user selectable.
(Figure 5) Item 9.
d. To assign an individual alarm sound for the selected tag, tap the Bell
symbol on the right side of the screen. A list of audible alerts will appear
allowing you to select your preferred alarm. (Figure 5) Item 11.
f. To set the alert distance, use the sliding
Range Alarm Threshold
bar
towards the bottom of the menu to the desired sensitivity level -
Near
or
Far
, up to a maximum of 50ft (15m).
All distances are approximate
.
(Figure 5) Item 10.
Step 7 -
Test the
Range Alarm
by placing the Wallet Reminder a
stationary location. Then take the iOS device and walk away from the
Wallet Reminder - when you reach the preset distance from the Wallet
Reminder the iOS device will begin to beep. By moving back into the
range, the alarm will cease.
(Figure 8 below)
Figure 8
Up to 50 Feet
iPhone(version 4S/5/5C/5S operating iOS6 and above) / iPad (versions
3/4 operating iOS6 and above) / iPad mini (all versions operating iOS6
and above) iPad Air and iPod Touch (version 4 operating iOS6 and above.)
Front
Back
Status LED
Power Switch
Battery cover
FindMe
Button
Power off
Power on
a. Slide the battery cover open as shown in point 1 (above).
b. Insert the battery with the negative sign (-) pointing upwards,
as shown in point 2.
c. Replace the battery cover as shown in point 3.
Step 4
- Turn on the Wallet Reminder by sliding the ON / OFF switch to
the ”ON” position as illustrated in the
Product Diagram (Above).
Once
switched
”ON”
, the tag will automatically enter ”pairing mode” and the LED
will flash
GREEN
once every second indicating is searching for your iOS
device.
Step 5 -
Run the
HiProx Multi
application on your iOS device by tapping
the onscreen icon.
a. Once the App has opened, tap the search button in the upper right
corner to discover all available devices.
(Figure 2) Item2
b. The App will present a Bluetooth Pairing Request.
(Figure 3)
c. Select
”Pair”
for each device (up to a maximum of four). The device will
then enter paired
(connected)
mode and the green LED will then blink
once
every 5 seconds.
d. Once the pairing process is completed, the Wallet Reminder is enabled
and the electronic leash function is active.
Figure 4
Illustrates 4 separate
connected devices.
1. Enter Help menu
2. Find new device
3. Setting button
4. Signal indicator
5. Remove tag button
6. Change device name
7. Battery status
8. On/Off link loss function
9. On/Off range alarm function
10. Set alarm range
11. Alarm sound setting
12. On/Off Map location function
13. Enter Map view menu
14. Enter Camera function
15. Enter airplane mode setting
Figure 2
Figure 3
Figure 5
Figure 4
Figure 6
2
15
1
Signal Indication
3
4
6
7
11
8
9
10
12
13
14
5
Introduction
11
The side
facing upwards
1
2
CR2016
3
Product Diagram
Figure 1
