HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 195 of
229
3.5.5.1.74.
Socket Parameters Reset - #SKTRST
#SKTRST - Socket Parameters Reset
AT#SKTRST
Execution command resets the actual socket parameters in the NVM of the device
to the default ones.
The socket parameters to reset are:
-
User ID
-
Password
-
Packet Size
-
Socket Inactivity Time-Out
-
Data Sending Time-Out
-
Socket Type
-
Remote Port
-
Remote Address
-
TCP Connection Time-Out
AT#SKTRST=?
Test command returns the
OK
result code.
Example AT#SKTRST
OK
socket parameters have been reset
3.5.5.1.75.
GPRS Context Activation - #GPRS
#GPRS - GPRS Context Activation
AT#GPRS=
[<mode>]
Execution command deactivates/activates the GPRS context, eventually proceeding
with the authentication with the parameters given with #PASSW and #USERID.
Parameter:
<mode>
- GPRS context activation mode
0 - GPRS context deactivation request
1 - GPRS context activation request
In the case that the GPRS context has been activated, the result code
OK
is
preceded by the intermediate result code:
+IP: <ip_address_obtained>
reporting the local IP address obtained from the network.
AT#GPRS?
Read command reports the current status of the GPRS context, in the format:
#GPRS: <status>
where:
<status>
0 - GPRS context deactivated
1 - GPRS context activated
2 - GPRS context activation pending.
AT#GPRS=?
Test command returns the allowed values for parameter
<mode>
.
