HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 169 of
229
#CGED – GPRS cell environment description
octets); 10.5.2.29 GSM04.08
<t_adv>
- Timing Advance, not used, always FFh
<bs_pa_mfrms>
- BS_PA_MFRMS (multiframes period for transmission of
PAGING REQUEST), range 0-7 mapped to 2-9; 10.5.2.11 GSM04.08
<amr_acs>
- AMR active codec
<amr_cod_dl>
- AMR codec used in DL
<amr_cod_ul>
- AMR codec used in UL
<amr_ci_i>
- AMR C/I in dB/2
<mean_bep_8psk>
- MEAN_BEP_8PSK[0...31]
<cv_bep_8psk>
- CV_BEP_8PSK[0...7]
<mean_bep_gmsk>
- MEAN_BEP_GMSK[0...31]
<cv_bep_gmsk>
- CV_BEP_GMSK[0...7]
GPRS-Parameters:
<GPRS_sup>
- GPRS supported (in serving cell); range 0-255 (8 bits);
10.5.2.37b GSM04.08
<RAC>
- Routing Area Code, range 0-1 (i bit);10.5.2.37b GSM04.08
<Split_Pg_Cycle>
- SPGC_CCH_SUP split pg_cycle on ccch by network, range 0-
1 (2 bits); 10.5.2.37b GSM04.08
<NCO>
- NETWORK_CONTROL_ORDER (GPRS_Cell_Options), range 0-3 (2
bits); 10.5.2.37b GSM04.08
<NOM>
- NETWORK OPERATION MODE (GPRS_Cell_Options), range 0-3 (2
bits); 10.5.2.37b GSM04.08
<T3192>
- T3192 (Wait for Release of the TBF after reception of the final block),
range 0-7 mapped to 0-1500 msec (3 bits); 12.24 GSM04.60:
500 msec
1000 msec
1500 msec
0 msec
80 msec
120 msec
200 msec
<Acc_Burst_type>
- ACCESS_BURST_TYPE (Literal AB_8 and AB_11),
range 0-1 mapped to 8,11 (1 bit); 12.24 GSM04.60
<DRX_Timer_Max>
- DRX_TIMER_MAX, range 0-7 (3 bits); 12.24 GSM04.60
<PBCCH>
- PBCCH present, boolean; 11.2.25 GSM04.60
<Ext_Measure_Order> - EXT_MEASUREMENT_ORDER, range 0-3 (2 bits);
11.2.23 GSM04.60
<PSI1_r_per>
- PSI1_REPEAT_PERIOD, range 0-15 mapped to 1-16 (4 bits);
11.2.18 GSM04.60
<si14_location>
“BCCH_NORM”
“BCCH_EXT”
“NO_BCCH_TYPE”
<packet_psi_status>
- may be 0-1
<packet_si_status>
- may be 0-1
