HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 171 of
229
#CGED – GPRS cell environment description
<urrcm_state>
- indicated by three hex digits (1:event, 2:state, 3:nr of sent
measurements)
<as_error_code>
- indication about error in UAS; integer, range 0-99
<release_cause>
- integer, range 0-99
<out_of_service>
- may be 0-1
<meas_bler>
- block error rate, range 1.0 *10exp(-6) … 9.9*10exp(-1); the value -
is indicated if the parameter is not available or for all cells except DCH; the internal
received value is divided by 2^23 before display;
<target_sir>
- target SIR, range -10 … +20 (3 digits are always displayed); the
value ‘-‘ is displayed if the parameter is not available or for all cells except DCH;
the internal received value is divided by 2^24 before display;
<meas_sir>
- integer displayed in hexadecimal format, range -10 … +20; the
value ’-‘ is displayed if the parameter is not available or for all cells except DCH;
the internal received value is divided by 2^24 before display;
<hierarchical_cell_structure>
- may be 0-1
<high_mobility_detected>
- may be 0-1
<limited_mode>
- may be 0-1
<cell_identity>
- indicated by seven hex digits
<dl_frequency>
- integer, range 0-16383
<ul_frequency>
- integer, range 0-16383
<ciphering>
- the GSM Ciphering may be ON or OFF
<gprs_ciphering>
- It is the GPRS Ciphering Algorithm GEA1 - GEA7
<ps_data_transfered>
- may be 0-1
<power_saving_mode>
- may be 0-1
<cell_type>
"AS" - Active Set,
"VAS"- Virtual Active Set
"M", - Monitored Cells
"D", - Detected Cells
"G", - GSM cells
"U", - UMTS cells
"NU",- Non Ranked UMTS cells
"NG" - Non Ranked GSM cells
<scrambling_code>
- integer, range 0-511
<rscp>
- Received Signal Code Power, range 0-91
<ecno>
- energy per chip/noice, range 0-24
<gsm_band>
"D",- 1800 MHz
"P",- 1900 MHz
"G" - 900 MHz
<arfcn>
- absolute radio frequency channel number, range 0-1023
<rssi>
- radio signal strength -110 … - 48 (negative values)
<bsic>
- base station identify code, range 0-3Fh (6 bits)
<ranking_value>
- integer, range 0-999
<ranking_status>
- integer, range 0-9
