HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 163 of
229
#SRAT – Selection of Radio Access Technology
< PreferredAct >
0 - RAT GSM
2 - RAT UMTS
Note: Dual mode means GSM and UMTS Access Technology will be active and
full InterRAT measurements and handovers are provided.
Note: The default value is Dual mode with UMTS preffered.
AT#SRAT?
Read command returns the previously set of <Act> and <PreferredAct> values.
#SRAT : <Act>,<PreferredAct>
where:
< Act > - see before
< PreferredAct > - see before
AT#SRAT=?
Test command returns supported <Act>s and list supported PreferredAct>s
3.5.5.1.49.
Extended Error Report for Location Update Reject During CS Registration - #NEER
#NEER - Extended Error Report for Location Update Reject During CS Registration
AT#NEER
Execution command causes the TA to return one or more lines of information text
<report>, determined by the MT manufacturer, which should offer the user of the
TA an extended Network error cause report of the reason for the failure in the last
unsuccessful CS Registration be returned.
#NEER:<report>
where:
<report>
- extended Network error cause report of the reason for the failure in the
last unsuccessful CS Registration be returned.
AT#NEER=?
Test command returns
OK
result code.
3.5.5.1.50.
Current Network Registration Status - #REGSTAT
#REGSTAT - Current Network Registration Status
AT#REGSTAT=<n>
Set command enables/disables network registration status unsolicited result code
#REGSTAT.
Parameter:
<n>
0 - disable network registration attach status unsolicited result code
1 - enable network registration attach status unsolicited result code #REGSTAT
The URC enabled by parameter <n> is in the format:
#REGSTAT: <State>
