background image

GS2101M IP2WiFi Adapter Command Reference Guide

1VV0301499

 Rev. 2.0

11

2019-08-05

<CR>
Carriage return

Each command is terminated by a carriage return.

<LF>
Line feed

Each command is terminated by a line feed.

<CR> <LF>
Carriage return
Line feed

Each response is started with a carriage return and line feed with some 
exceptions.

 < >
Angle brackets

Enclose a numeric range, endpoints inclusive. Do not enter angle 
brackets as part of any command.

<SSID>

 =
Equal sign

Separates the variable from explanatory text. Is entered as part of the 
command.

PROCESSID = <CID>

.
dot (period)

Allows the repetition of the element that immediately follows it multiple 
times. Do not enter as part of the command.

.AA:NN can be expanded to 1:01 1:02 1:03.

A.B.C.D
IP address

IPv4-style address.

10.0.11.123

LINE
End-to-line input token

Indicates user input of any string, including spaces. No other parameters 
may be entered after input for this token.

string of words

WORD
Single token

Indicates user input of any contiguous string (excluding spaces).

singlewordnospaces

Table 2   Document Text Conventions (Continued)

Convention Type

Description

Содержание GS2101M Series





































































































































































































Отзывы: