GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0
103
2019-08-05
5.3.3 Security Configuration
5.3.3.1 Security Setting
This command is used to configure the GS node with different security configuration.
Command Syntax
AT+WSEC=n
Parameter Description
describes the Security Configuration parameters.
Synchronous Response
Table 75 Security Configuration Parameters
Parameter
Optional/Mandatory
Value
Mode
Description
n
Mandatory
0 (default)
Auto security (All)
The IP2WiFi Application
supports either one of the
Values. This strict security
compliance is not applicable
for WPS feature.
1
Open security
2
WEP security
4
WPA-PSK security (TKIP
only)
8
WPA2-PSK security (AES
only)
16
WPA Enterprise
32
WPA2 Enterprise
64
WPA2-AES+TKIP security
Note:
1> In AP mode, only Open and WPA-AES as security mechanism is supported.
2> Enterprise security is supported in Station mode and not supported in limited AP mode.
3>
5>GS module is unsuccessful to associate to an AP (WPA personal) when configured with AES for both Multicast
and Unicast (as the Group Key Handshake timeout is (0x0010))
Security: WEP-64 Open/Shared,
WEP-128 Open/Shared,
WPA-Personal (TKIP),
WPA2-Personal (AES),
WPA2-Personal (AES+TKIP),
WPA Enterprise (TKIP),
WPA2-Enterprise (AES),
WPA2-Enterprise (AES+TKIP).
6>Only TKIP is supported in WPA security
