Telit Wireless Solutions GS2101M Series Скачать руководство пользователя страница 113

Страница: 113 / 196

GS2101M IP2WiFi Adapter Command Reference Guide

1VV0301499

Rev. 2.0

113

2019-08-05

5.3.5 Association

This command is used to create or join an infrastructure network (limited access point
mode).

Command Syntax

AT+WA=<SSID>[,[<BSSID>][,<Channel>],[Rssi Flag],[WPS
Registrar],[Unscheduled automatic power save delivery
configuration]]

Command Note

•

The WPS registrar is supported only with WPA/WPA2 security. It is not supported in
open security.

•

When WPA registrar is required, setting strict security using AT+WSEC (See
5.3.4 Scanning, page 111) command is mandatory before issuing the AT+WA
command.

Usage

The following is the behavior of the command in different modes:

1. In STA mode, i.e., AT+WM=0 (see

5.1.2 Operation Mode, page 78

). The node will

attempt to associate with the requested network. If the requested network is not
available, an error message will display.

2. In AP mode, i.e., AT+WM=2 (see

5.1.2 Operation Mode, page 78

), The node creates

an infrastructure (Limited AP) network with the specified SSID. Issue AT+WSEC=n
(refer

5.3.4 Scanning, page 111

for values) to create Limited AP with security as

specified in

Table 75Security Configuration Parameters, page 103

Parameter Description

Table 88, page 114

describes the associate with a Network or create an Infrastructure (AP)

Network parameter.

NOTE:

Do not issue AT+WA command when GS node is in WiFi direct (P2P)

mode. To issue AT+WA command, switch the GS node to either Station mode or
Limited-AP mode using AT+WM command.

Содержание GS2101M Series





































































































































































































Результаты поиска

Содержание GS2101M Series

Отзывы:

Telit Wireless Solutions GS2101M Series, Справочник по командам, Страница: 113 / 196

Результаты поиска

Содержание GS2101M Series

Отзывы: