Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 50 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 50 of 261
D – Dial
ATD<number>[;]
Execution command starts a call to the phone number given as parameter.
If “
;
” is present, a
voice call to the given number is performed, regardless of the
current value of the connection mode set by +FCLASS command.
Parameter:
<number> - phone number to be dialed
Note: type of call (
data or voice ) depends on last +FCLASS setting.
Note: the numbers accepted are 0-9 and *#ABCDP,W@!$;
Note: for backwards compatibility with landline modems modifiers
”
P
”
, ”,”, ”W”,
“!”, “@” ” ” ” ” are accepted.
ATD><str>[;] Issues a call to phone number which corresponding alphanumeric field is <str> ;
all available memories will be searched for the correct entry.
If “
;
” is present a
voice call is performed.
Parameter:
<str> - alphanumeric field corresponding to phone number; it must be enclosed in
quotation marks.
Note: parameter
<str> is case sensitive.
ATD> < n > [;] Issues a call to phone number in entry location <n> of the active phonebook.
If “ ;
” is present a
voice call is performed.
Parameter:
<n> - active phonebook memory storage entry location; it should be in the range
of locations available in the active phonebook memory storage.
ATDL Issues a call to the last number dialed.
ATDS=<nr>[;] Issues a call to the number stored in the MODULE internal phonebook position
number
<nr> .
If “;” is present a voice call is performed.
Parameter:
<nr> - internal phonebook position to be called (See commands &N and &Z )
Example To have a voice call to the 6-th entry of active phonebook:
ATD>6;
OK
To call the entry with alphanumeric field “Name”:
ATD>”Name”;
OK
Reference V25ter.