Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 150 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 150 of 261
#SHSAGC - Handset Automatic Gain Control
AT#SHSAGC =
<mode>
Set command enables/disables the automatic gain control function on audio handset
input.
Parameter:
<mode>
0 - disables automatic gain control for handset mode (default)
1 - enables automatic gain control for handset mode
Note: This parameter is saved in NVM issuing AT&W command .
AT#SHSAGC? Read command reports whether the automatic gain control function on audio
handset
input is currently enabled or not, in the format:
#SHSAGC: <mode>
AT#SHSAGC =? Test command returns the supported range of values of parameter
<mode> .
#SHSEC - Handset Echo Canceller
AT#SHSEC =
<mode>
Set command enables/disables the echo canceller function on audio handset output.
Parameter:
<mode>
0 - disables echo canceller for handset mode (default)
1 - enables echo canceller for handset mode
Note: This parameter is saved in NVM issuing AT&W command .
AT#SHSEC? Read command reports whether the echo canceller function on audio
handset output is currently enabled or not, in the format:
#SHSEC: <mode>
AT#SHSEC =? Test command returns the supported range of values of parameter
<mode> .
#SHSNR - Handset Noise Reduction
AT#SHSNR =
<mode>
Set command enables/disables the noise reduction function on audio handset input.
Parameter:
<mode>
0 - disables noise reduction for handset mode (default)
1 - enables noise reduction for handset mode