Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 221 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 221 of 261
+SERVICE – Notification of Service
Parameter:
<serv>
0 – No Service
1 – 1xRTT Service
2 – EVDO Release 0
3 – EVDO Release A
4 – GPRS(Not Support)
Test command returns
#SVCSTAT – Service Statue
AT#SVCSTAT?
Read command returns the service statue about 1x and EVDO.
#SVCSTAT: <1x_svc_stat>,<EVDO_svc_stat>
Parameter:
<1x_svc_stat> - Status parameter for 1x service.
0 – No Service State
2 – Normal Service State
<EVDO_svc_stat> - Status parameter for EVDO service.
0 – No Service State
2 – Normal Service State
4 – Power Save or Deep Sleep
SVCSTAT
Test command returns
#RTN – Reverse Logistic Support
AT#RTN=<n>
The execute command will reset the selected parameter back to its factory value.
Parameter:
<n> - Parameter for reset.
0 – MDN
1 – MSID
2 – Last Call Time
3 – Total Call Time
4 – MIP Porfile – This deletes only MIP profile 1
Note: Case of Verizon , after reset module MDN and MSID are changed as
follow:
The MDN and MSID default values should be set to the last four digits of the ESN
or pESN for MEID.
RTN
Test command returns