Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 236 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 236 of 261
+VCMGR - Read Message
AT+VCMGR=
<index>
Execution command reports the message with location value <index> from
<memr> message storage ( <memr> is the message storage for read and delete SMs
as last settings of cCPMS).
Parameter:
<index> - message index.
The output depends on the last settings of command
+CMGF (message format to
be used)
Output format for received messages
(the information written in italics will be
present depending on +CSDH last setting) :
+VCMGR:
<stat>,<orig_num>,<callback>,<date
>[,<tooa>,<tele_id>,<priority>,<enc_type
>,<length> ]<CR><LF><data>
If there is either a Sent or an Unsent message in location <index> the output
format is the same with the upper received message
where:
<stat> - status of the message
"REC UNREAD" - new received message unread
"REC READ" - received message read
"STO UNSENT" - message stored not yet sent
"STO SENT" - message stored already sent
<orig_num> - Origination number.
<callback> - Callback number.
<date> - Received date in form as "YYYYMMDDHHMMSS".
<tooa> - Type of < orig_num >.
<toda> - Type of < da >.
<tele_id> - Teleservice ID.
4097 - page
4098 - SMS message
<priority> - Priority.
Note: The priority is different with every carrier.
In case of Sprint and Aeris.Net:
0 - Normal (factory default)
1 - Interactive
2 - Urgent
3 - Emergency
In case of Verizon:
0 - Normal (factory default)
1 - High