Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 238 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 238 of 261
+VCMGL - List Messages
Each message to be listed is represented in the format (the information written in
italics will be present depending on +
CSDH last setting):
If there is at least a
Received message or Sent/Unsent message to be listed the
representation format is:
If there is at least a
Received message to be listed the representation format is:
+VCMGL:
<index>,<stat>,<orig_num>,<callback>,<date>
[,<tooa>,<tele_id>,<priority>,<e
nc_type>,<length>] <CR><LF> <data>
Where
<orig_num> - Origination number.
<callback> - Callback number.
<date> - Received date in form as "YYYYMMDDHHMMSS".
<tooa> - Type of < orig_num >.
<toda> - Type of < da >.
<tele_id> - Teleservice ID.
4097 - page
4098 - SMS message
<priority> - Priority.
Note: The priority is different with every carrier.
In case of Sprint and Aeris.Net:
0 - Normal (factory default)
1 - Interactive
2 - Urgent
3 - Emergency
In case of Verizon:
0 - Normal (factory default)
1 - High
<enc_type> - Encoding type of message.
0 - 8-bit Octet
2 - 7-bit ASCII
4 - 16-bit Unicode
<length> - Length of message.
<data> - Message data.
Note: If a message is present when +CMGL="ALL" is used it will be changed
status from
REC UNREAD to REC READ .
Miscellaneous Unsolicited Result Codes - Not applicable
Execution Time - Executes immediately.
Reference – Verizon
Note: Available only under text mode (AT+CMGF=1) . Also, this included sent