Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 188 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 188 of 261
#SKTRST - Socket Parameters Reset
AT#SKTRST
Execution command resets the actual socket parameters in the NVM of the device
to the default ones.
The socket parameters to reset are:
-
User ID
- Password
- Packet Size
- Socket Inactivity Time-Out
- Data Sending Time-Out
- Socket Type
- Remote Port
- Remote Address
- TCP Connection Time-Out
Note: User ID and Password will not be affected by this command execution. It
means that they are not set to the default values, just keeping the previous value.
AT#SKTRST=? Test command returns the OK result code.
Example AT#SKTRST
OK
socket parameters have been reset
#CDMADC – CDMA Data Connection
AT#CDMADC=
[<mode>]
Execution command deactivates/activates CDMA data connection( CDMA PDP
context), eventually proceeding with the authentication with the parameters given
with #PASSW and #USERID.
Parameter:
<mode> - CDMA PDP context activation mode
0 – CDMA PDP context deactivation request
1 – CDMA PDP context activation request
In the case that the CDMA PDP context has been activated, the result code
OK is
preceded by the intermediate result code:
+IP: <ip_address_obtained>
reporting the local IP address obtained from the network.
AT#CDMADC? Read command reports the current status of the CDMA PDP context, in the format:
#CDMADC: <status>