Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 101 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 101 of 261
+CMGR - Read Message
AT+CMGR=
<index>
Execution command reports the message with location value <index> from
<memr> message storage ( <memr> is the message storage for read and delete SMs
as last settings of cCPMS).
Parameter:
<index> - message index.
The output depends on the last settings of command
+CMGF (message format to
be used)
(PDU Mode)
If there is at least one message to be listed the representation format is:
+CMGR:<stat>,"",<length><CR><LF><PDU>
Case of received message from base station :
<PDU>:
<orig_num>,<date><tele_id><priority><enc_type><length><data>
Case of sending message to base station:
<PDU>:
<da><callback><tele_id><priority><enc_type><length><data>
where
<stat> - status of the message
0 - new message
1 - read message
2 - stored message not yet sent
3 - stored message already sent
<length> - length of the PDU in bytes.
<pdu> - message in PDU format
(Text Mode)
Output format for received messages (the information written in italics will be
present depending on +CSDH last setting) :
Output format for message delivery confirm:
+CMGR:
<stat>,<orig_num>,<callback>,<date
>[,<tooa>,<tele_id>,<priority>,<enc_type
>,<length> ]<CR><LF><data>
If there is either a
Sent or an Unsent message in location <index> the output
format is:
+CMGR:
<stat>,<da>,<callback
>,[,<toda>,<tele_id>,<priority>,<enc_type>,<length> ]<C