Telit Wireless Solutions DE910-DUAL, Справочное руководство

Страница: 214 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 214 of 261
#CAI – Common Air Interface parameters
Example AT#CAI?
#CAI: 4376,30,522,30,350,330,6,6,6,-85,-5,0,2,0,0,0,2,0,0,1
OK
AT#CAI=?
OK
#MODEM – Modem Configure parameters
AT#MODEM
[=<index>]?
Set/Read command returns the modem configuration parameters of the module.
Parameter:
<index>
0 .. 13 - To get specific modem configuration parameter value of the module
#MODEM: <mdn>,<msin>,<vbatt>,<temp>,<systemtime>,<calltime>,<totalc
alltime>,<modemstatus>,<fwver>,<model>,<namname>,<lock>,<prlver>,<de
epsleep>
Where:
<mdn> - Mobile directory number
<msin> - Mobile Subscriber Identifier Number
<vbatt> - Current Battery Voltage Level
<temp> - Current Temperature
<systemtime> - Current System Time (received from the network)
<calltime> - Latest Call Time
<totalcalltime> - Total Call Time
<modemstatus> - Current Modem Status
0: IDLE State
1: Origination State
2: Alerting State
3: Conversation State
4: Call End State
5: Dormant Mode State
<fwver> - Firmware Version, Qualcomm Patch release version
<model> - Model Name
<namname> - Current Nam Name
Note: Not all service providers use NAM name, some providers use a string to
display service provider’s name. If service provider does not use this, then
“
UNKNOWN” will be displayed.
In case of VERIZON, Nam Name is blank.