Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
64
6. Communication
The menus for communication devices programming are accessible only from the Engineer of the system (engineer
code 7777 by default).
ECLIPSE Control Panels Series
– dialer capability:
Control panel Digital Communicator Protocols
Remote progr.
Voice Dialer
ECLIPSE 8
2 Tel. numbers
SIA, CID
1 Tel. number
ECLIPSE 16
2 Tel. numbers
SIA, CID
8 Tel. numbers
ECLIPSE 32
4 Tel. numbers
SIA, CID
8 Tel. numbers
Quick table for 6. COMMUNICATION Programming Menu
Address Number
Programming parameter
ECLIPSE 8
ECLIPSE 16
ECLIPSE 32
6
0
0
0
Communicaton Options
6
0
0
1
Attempts
6
0
0
2
Test Period
6
0
0
3
Test Hour
6
0
0
4
TLM delay
6
0
1
0
Telephone 1 Number
6
0
1
1
Telephone 1 Protocol
6
0
1
2
Telephone 1 Messages
6
0
1
3
Telephone 1 Areas
...
6
0
4
0
Telephone 4 Number
6
0
4
1
Telephone 4 Protocol
6
0
4
2
Telephone 4 Messages
6
0
4
3
Telephone 4 Areas
6
1
0
0
Voice Dialer Options
6
1
0
1
VD Message Repetitions
6
1
0
2
VD Number of attempts
6
1
0
3
VD Language
6
1
1
0
VD Telephone 1 Number
6
1
1
1
VD Telephone 1 Areas
...
6
1
8
0
VD Telephone 8 Number
6
1
8
1
VD Telephone 8 Areas
6
9
0
0
UDL Telephone number
6
9
0
1
PC ID
6
9
0
4
UDL Options
6
9
0
5
Rings
ATTENTION:
Due to differences in PSTNs provided in different countries and territories, Teletek
Electronics cannot provide unconditional assurance of successful operations on every PSTN network
termination point. This may be subject to changes made to the communication facilities or procedures of
each individual telephone service provider.
Additionally, Teletek Electronics’ alarm equipment is designed
to work with traditional telephone line. Please, bear in mind that the use of alarm panels over alternative
telephone systems like VoIP (Voice over Internet Protocol) may not be as effective as with traditional
telephone line.
If you are experiencing problems with the use of a Teletek Electronics device over PSTN, please contact
us for further assistance.
