Telestream PRISM MPI, Руководство пользователя

Страница: 84 / 304

Configure the Instrument
Configure and Select Signal Inputs
PRISM MPI-MPX User Manual
84
Note:
Quad Link is intended for 8K and can have 32 channels, instead of 16, in
Program Configuration.
d. Select the type of program (mono, stereo, etc.) and select the audio channel to
assign it. Repeat until all the audio in the current input signal have programs
assigned to channels.
M
is mono, 1 channel.
ST is stereo, 2 channels.
5.1
is surround sound, 6 channels.
7.1 is surround sound, 8 channels.
Unassigned
removes an assignment from a channel. Click
Unassigned
and click
any block in an assignment, for example the middle of a 7.1 assignment, the
entire assignment is removed and is not displayed on the Audio application.
Default resets the channels to 8 stereo pairs.
Clear
removes all assignments, including the default.
e. Select Save and close the menu.
Note: You must save the program configuration to update the programs in the audio
bars and loudness meter.
Select DOLBY
Note:
Dolby D Plus and E are available in SDI and 2022.
a.
Select
DOLBY
.
b. In the Dolby Audio Channel Pair menu, select the audio channel pair that
contains Dolby audio.
Dolby audio in the selected channels are then decoded. Only Dolby D/D Plus/E
decode is supported.
c. Select Save and close the menu.
Note: Audio programs configured in the Program Configuration menu are used to
select a program for measurement by the Loudness application, to display audio bars
in the Audio application, and to monitor with headphones. When all the channels are
unassigned, all the channels are treated as stereo pairs. The audio programs in the
Dolby stream are automatically set up based on the Dolby metadata.
Quad Link Input Configuration
Note: All four SDI inputs must be connected to a cable on the back of the PRISM to
use Quad Link Inputs.