Telestream PRISM MPI, Руководство пользователя

Страница: 85 / 304

Configure the Instrument
Configure and Select Signal Inputs
85
PRISM MPI-MPX User Manual
1.
Select the
Settings
icon ( ) to open the Settings menu.
2. Select Inputs to open the Inputs submenu.
3.
Select an input and then select
SDI
.
4. Confirm that Quad Link cables are connected to the back of the instrument.
– Quad Link A is connected to SDI-IN 1
– Quad Link B is connected to SDI-IN 2
– Quad Link C is connected to SDI-IN 3
– Quad Link D is connected to SDI-IN 4
5.
Select
Quad Link
for the Input Configuration. SDI 1-4 (Link A-D) is selected by
default.
Note:
The Quad Link and UHD/4K Mode buttons are only available when software
option MP2-FMT-4K is present.
6. Use the UHD/4K Mode buttons to select Auto , Sq Div (Square Division) or 2 SI (Two
Sample Interleave).
7. Select Video Settings .
8.
Select Audio Settings .
Note:
In AUTO mode, the instrument defaults to Two Sample Interleave mode if the
Video Payload Identifier (VPID) complies with SMPTE 425.3 or SMPTE 425.5. The
instrument defaults to Square Division mode if the VPID complies with SMPTE 292.1,
SMPTE 372, SMPTE 425.1, or a quad-HD signal is present and VPID is missing. VPID in
the signal is required for this option to operate properly.
9.
Select
Save
and close the menu.
Note:
The 8K format trace applications—Waveform, Stop, Vector, Diamond, and
Lightning Displays, enabled by MP2-FMT-8K—are rendered based on the resized 8K
signal and are suitable for operational applications such as setting camera exposure